Best Shallow Mount 10-Inch Subwoofer (2018) – Buyer’s Guide

Best Shallow Mount 10-Inch Subwoofer (2018) – Buyer’s Guide
Rate this post

The best shallow mount 10-inch subwoofer is an excellent solution to what problem now? If you have a truck or sports car that doesn’t offer enough trunk space to fit an entire component subwoofer. This is where and when a shallow mount version comes to the rescue.

The thing about component subwoofers is that they are equipped with a large driver. While this particular part delivers optimal power, it also demands tons of cabinet space.

And the thing about shallow mount subwoofers is that these powerhouses perform just as well. But without hogging too much car storage space!

So if I’ve succeeded at getting you interested in and excited about this kind of equipment, please keep reading.

Below you’ll see that I’ve done my best to bring to you the best of the best options currently available.

TOP 10 REVIEWS OF THE BEST SHALLOW MOUNT 10-INCH SUBWOOFER

Here’s a comparison table that you can refer to if you want to understand the basic differences between the models. But for a complete, thorough review, all you need to do is scroll down.


1. ROCKFORD FOSGATE R2S-1X10 PRIME R2S SINGLE 10-INCH SHALLOW LOADED ENCLOSURE – FOR TIGHT SPACES

If you’re in the market for the best shallow mount 10-inch subwoofer for tight/restricted spaces, you’ll want to check out the first pick. It’s called the Rockford Fosgate R2S-1X10 Prime R2S Single 10-Inch Shallow Loaded Enclosure.

There’s no doubt about the performance of the unit as its manufacturer is none other than Rockford Fosgate. They have been in the business for more than 35 years now. So you can blindly place your trust in them.

Now, you’ll be glad to know that the R2S-1X10 Prime R2S has a medium-density construction of fiberboard. Further protected using tough black carpeting! So the outcome is a long-lasting, durable 10-inch subwoofer.

The peak power capability you’re dealing with is 400 watts. As for the voice coils, they provide all the flexibility you need to wire your system for optimal impedance. All these are essential features, so that area is pretty much covered.

How about additional features? In the case of the Rockford Fosgate R2S-1X10 Prime R2S, it is equipped with a special elevated motor design. This is useful for allowing the unit to handle more power in compact enclosures.

On top of that, there’s the mica-infused polypropylene cone and high-frequency poly-foam material surround. Such a combination works exceptionally well at delivering accurate, deep tones. So you have a lot to look forward to with every Rockford Fosgate creation!

The most noteworthy characteristic is the space-saving design of the equipment. The quality of sound, especially bass, is nothing but impressive. And why wouldn’t it be when the construction consists of two phenomenal materials. These include high-frequency poly-foam and mica-infused polypropylene. The former is used for the surround while the latter makes up the cone.

I feel obliged to share the negative feedback as well. Although there is only one major problem you might have to deal with here. The screws responsible for holding the unit in place are prone to stripping out. But it takes place after a few months of use. And proper maintenance can avoid or postpone the trouble.

Pros

  • The Rockford Fosgate subwoofer is excellent for its shape and size.
  • Power handling strength is praiseworthy.
  • It produces cleaner, deeper bass.

Cons

  • Over time, the subwoofer starts to rattle.
  • The screws tend to strip out.

2. PIONEER TS-SW2502S4 10-INCH SHALLOW-MOUNT SUBWOOFER – FOR HIGH-QUALITY

Let me begin by stating that Pioneer is a well-known brand that manufactures top quality speakers. Such as the PIONEER TS-SW2502S4 10-Inch Shallow-Mount Subwoofer! The one characteristic that you might appreciate the most about this pick is its impressive design with great strength.

The easy-to-install structure of this best shallow mount 10-inch subwoofer is the first thing you’ll notice. The second noteworthy attribute is the 1,200-watt peak power efficiency. As for other specs, the frequency response and sensitivity rating are also remarkable.

Then comes the mica-infused resin material cone that Pioneer has created. What it does is enhances durability. While also taking care of distortion in order to deliver optimal performance!

You might also value the phenomenal cone surface that produces deeper and louder bass. And it does so by moving plenty of air. Even when it comes to creating accurate bass, the TS-SW2502S4 doesn’t let you down.

Thanks to the molded, mica-infused resin material cone. It’s like hitting two birds with one stone, isn’t it? So for a great music experience, feel free to pick any Pioneer model.

The fact that you can fit these high-quality subwoofers just about anywhere says a lot about its practical design. The materials used for construction are of top quality. So expect the unit to last for many, many years.

Also, power handling and sensitivity are optimally high. So you have nothing to be troubled about as far as performance goes.

It’s the design of the PIONEER TS-SW2502S4 10-Inch Shallow-Mount Subwoofer that brings forth a drawback. A smaller sealed enclosure with minimal depth is not what you’re looking at here. The equipment demands more space in that regard.

Pros

  • The Pioneer subwoofer produces excellent sound without distortion.
  • Installing it is an easy task.

Cons

  • Turning the amp up gives rise to burnt smell.
  • The unit requires a large sealed enclosure with more depth.

3. ALPINE SWR-T10 10-INCH SHALLOW MOUNT SUBWOOFER – FOR HIGH-END PERFORMANCE

 

Now here’s a pick that ranks as the most reliable in performance. Consistency in the high performance of this Alpine Shallow Mount Subwoofer is what makes a huge impact. So if you’re looking to upgrade, this is the option to take into consideration.

Let me reveal an ugly truth to you before I get into the specs of this shallow mount subwoofer.

Most of the top rated picks require a breaking in period before they start to perform like little beasts. But, fortunately, this model does not fall into that category. The Alpine Shallow Mount Subwoofer sounds its best straight after installation. And it’s the molded-injected resin design that makes it possible.

Alpine is a brand known for its phenomenal thin Type-R structure. Such a design contributes to providing deep, clean bass. And that too in a lightweight unit with mounting depth just a little above 3 inches. So the invaluable frequency response rate is also at an optimally low level.

Now here’s a first. The Alpine Shallow Mount Subwoofer feature FEA-Optimization. In simple words, what the component does is reduce distortion, maximum linearity, and boost power handling. But what keeps the unit cool is the improved system of airflow management and heat sink. So to gain access to hard-hitting performance, this is the way to go.

Let me use this text box to highlight the construction of the Alpine Shallow Mount Subwoofer. The woofer cone has a solid aluminum structure.

The surround is made of injection molded rubber, the high-quality Santoprene kind. And to make things even better, the overall design is as slim as you would like to be. So it fits well even in compact/tight areas.

If you think installing the Alpine Shallow Mount Subwoofer is a cakewalk, I’m sorry to tell you that you’re wrong. Professional installation is more fitting.

Pros

  • The Alpine subwoofer produces hard-hitting sound.
  • ​It is perfect for small spaces.
  • High-quality design and craftsmanship.

Cons

  • Installation requires some expertise.

4. JL AUDIO 10TW3-D4 SHALLOW MOUNT SUBWOOFER – FOR CLEAR BASS

The JL Audio TW3 Shallow Subwoofer is one of the very few competitive picks that give the others a serious run for the money. That’s because the manufacturer has been a part of the industry for all good reasons. They create models with amazing features.

But here’s the most important reason behind their success. In this context, it’s the low mounting depth of the JL Audio Shallow Mount Subwoofer. That makes installation the easiest task.

What about power handling? The peak value is set at 800 watts. Even the frequency range of this JL Audio Shallow Mount Subwoofer is more than just satisfactory. And the proof of that is heard in the form of heart-throbbing, clear bass.

When buying the best shallow mount 10-inch subwoofer, you want it to fit inside compact areas. Am I right? At the same time, you expect the little monster to optimize minimal airspace.In that regard, the JL Audio TW3 Shallow Subwoofer is a perfect choice. Thanks to its extraordinary specs and slim design.

If I were to give two reasons to consider this option, this is what they would be. The first is associated with construction. Mica-filled, injection-molded polypropylene cone for strength. And the second reason is the combination of low mounting depth and small enclosure. The former and latter do nothing but simplify the process of installation.

If you want your purchase to last for years to come, I would advise you to select another option. Not that the durability of the JL Audio TW3 Shallow Subwoofer is poor. The model is just not as long-lasting as the others on the current market.

Pros

  • The JL Audio subwoofer is excellent for limited space.
  • It delivers crisp, clean bass.

Cons

  • Not as durable as you might expect.

5. ROCKFORD FOSGATE P3SD2-10 PUNCH P3S 10-INCH DVC SHALLOW SUBWOOFER – FOR A TIGHT BUDGET

Here’s another creation by Rockford Fosgate. But this one’s for budget-friendly users. The Rockford Fosgate P3SD2-10 Punch P3S 10-Inch DVC Shallow Subwoofer is an affordable option. Despite that, it remains one step ahead. All because of the industry-leading reputation of the company! Now, let’s talk features!

The one unique quality present in this best shallow mount 10-inch subwoofer is the exclusive Santoprene Surround technology. To put into simple words, you get access to impressive surround and unlimited range features. Also, the anodized aluminum designed cone is equipped with double voice coils. So wiring seems like a breeze!

Peak power value is 600 watts. So the inexpensive subwoofer has the ability to deliver greatness even in sealed enclosures. It offers a seamless audio experience that delivers unparalleled bass. That too without producing any distortion! So it’s a model that can achieve it all.

Small package, large sound. That’s exactly how I would like to describe the Rockford Fosgate P3SD2-10 Punch P3S. It fits in tight spots. While also performing as exceptionally well as any high-quality standard subwoofer!

What I’m about to discuss might sound a bit odd. But you should know that it does negatively impact the efficiency of the system. The movement of the Rockford Fosgate10-Inch DVC Shallow Subwoofer is very rigid. Unlike the other models reviewed in the article!

Pros

  • The Rockford Fosgate subwoofer is very compact yet powerful.
  • ​Build quality is unbeatable.
  • It can handle loud music without distortion.

Cons

  • Rattling is not a stranger to the unit.
  • The movement of the speaker is too rigid.

6. SKAR AUDIO VD-10 D4 10” DUAL 4 SHALLOW MOUNT CAR SUBWOOFER – FOR HANDLING GREAT POWER

The advanced VD series of Skar Audio is a force to be reckoned with. And the Skar Audio VD-10 D4 10” Dual 4 Shallow Mount Car Subwoofer is no exception. The music system is crafted to be incredibly powerful and flexible. And with an optimal mounting depth, it has the ability to fit into tight/compact areas.

When the peak power is 800 watts, it means the unit can handle anything you direct towards it. But what’s even more compelling is the exceptional bass performance. The remarkable double voice coils deliver outstanding high-amplitude reproduction of bass.

But does this also mean that cooling is going to be a problem? Well, if it were any other model, then it would cause some trouble. But in this case, there’s no reason to worry. Since it’s the best shallow mount 10-inch subwoofer, the presence of an advanced system doesn’t seem so surprising. So that’s the kind of an experience you’re staring at right now!

Not all subwoofers on the current market boast of competition-grade construction. But the product at hand is one of them. And there’s nothing better than that!

To be honest, even the subwoofer’s ability to create tighter, louder bass is quite out of the ordinary. And there’s nothing more convincing than that!

When using the Skar Audio VD-10 D4 Shallow Mount Subwoofer, you’ll end up making the most of it. And so will your nose. What I mean to say is that the unit smells burnt immediately after you install it. Quite an unbelievable and strange drawback, isn’t it?

Pros

  • The Skar Audio subwoofer features a strong rubber surround.
  • Overall sound quality is through the roof.

Cons

  • It gives out an unpleasant smell.

7. PIONEER TS-SWX2502 10-INCH SHALLOW-MOUNT PRE-LOADED ENCLOSURE – FOR DURABILITY

Hunting for the best shallow mount 10-inch subwoofer that’s going to last for many years is quite difficult. You have to take certain factors into account. So you’ll be glad to know that this creation by Pioneer has it all. The TS-SWX2502 10-inch Shallow-Mount Pre-Loaded Enclosure is equipped with both basic and advanced features. The kind that contributes to the long-lasting value of the system!

The pre-loaded design is a huge plus as it makes the process of installation quick and easy. You’ll come to appreciate the large area as it removes more air. And that, in turn, increases the bass depth and loudness.

Upon comparing this particular model to the others, I discovered something unusual. But in a good sense! The Pioneer TS-SWX2502 doesn’t sound like the other 10-inch subwoofers reviewed in the article. And that’s because it’s equipped with a greater gasket surface and cone. As a result of which there’s minimal loss of bass response.

And if that wasn’t all, the manufacturer also decided to add a remarkable double spider design. It gives the cone structure better motion control, which improves the overall sound. In that sense, you might also go for the durable carpeted covering. So the unit is well-protected against damage. Conclusively, you’re in for the long haul if you select this option.

What’s the big deal about the Pioneer TS-SWX2502 10-inch Shallow-Mount Pre-Loaded Enclosure? It features a large cone structure to provide greater gasket surface and cone. And that too without altering the general external dimension! Such a surface of the cone allows the system to produce deeper, louder bass. And it does so by moving plenty of air.

One more praiseworthy advantage is the mica-infused, molded resin design. When the cone is built using this material, the subwoofer is destined to create accurate bass.

The thing about certain models is that you can subject them to extended use. While some units don’t perform so well under such circumstances! In simple terms, the Pioneer TS-SWX2502 might fail to live up to your expectations after a few months of prolonged use. But only with regards to producing the desired output.

Pros

  • The Pioneer subwoofer has an excellent cooling capacity.
  • ​The double spider structure delivers precise bass response.
  • It is a lightweight yet very durable unit.

Cons

  • Poor performance at a higher volume.
  • The output factor degrades steadily.

8. ROCKFORD FOSGATE R2 ULTRA SHALLOW 10-INCH DVC SUBWOOFER – FOR THE CHEAPEST PRICE

It’s true that the Rockford Fosgate R2 Ultra Shallow 10-Inch DVC Subwoofer is the lowest priced model on the list. But that doesn’t mean it’s any less competitive than the others. If that were so, it wouldn’t have made the cut to begin with. So let’s find out everything we can about this best shallow mount 10-inch subwoofer.

Installing the unit is quite an easy and straightforward task. Given its mounting depth of only 3.4 inches! You can fit it in the trunk, car deck area, on speakers, or under the seats. The choice is all yours.

The invaluable impedance of the Rockford Fosgate R2 Ultra Shallow is at an optimal level. Suitable for producing sizeable volume and high-quality sound through that system! Even the 400-watt peak power makes the model an ideal choice for delivering great punchiness.(More on speaker specifications)

How about the design and build? In that context, I would like to discuss only one important component. And that is the remarkable mica-infused polypropylene cone. Not only is this particular part durable but responsive too.

Needless to say, Rockford Fosgate has managed to pull off manufacturing an affordable pick that delivers nothing short of cutthroat performance.

Apart from the price, what else is compelling about the pick? The excellent sound distribution.

Thanks to the stamp-cast equipped basket. The easy installation and perfect fit.

Thanks to the minimum mounting depth of 3.4 inches. The unbeatable responsiveness of the cone.

Thanks to its mica-filled polypropylene construction. So you’re paying too less for something that outperforms the more expensive models currently available.

I’m sorry to break it to you but the coils are not so high in durability. They are prone to damage in the form of blowing up too soon. But here’s the thing; the company’s support team is plenty responsive.

Pros

  • The Rockford Fosgate subwoofer can create deeper, punchier bass.
  • ​It has a compact, low profile.

Cons

  • Excellent highs and mids, but it’s not the same for the lows.
  • The coils tend to blow out early.

9. BOSS AUDIO D10F 10-INCH SHALLOW MOUNT CAR SUBWOOFER – FOR THE MOST ADVANCED DESIGN AND FEATURES

I have tested several models, and while doing so here’s something I found in common. Most of the units came with a break-in period. I mean I had to subject each to medium and low volume levels over a time frame of 3-4 hours. Only then it became possible and easier to over-drive them without stumbling upon poor performance or failure.

But why am I telling you this? It’s because the BOSS Audio D10F doesn’t require any breaking in. And that means total comfort and convenience from the very beginning. It also implies that the unit is well-equipped and pre-equipped to deliver high performance from day one.

Now it’s time to talk about the advanced design and features. The cone is built using poly-injected material. So resilience and durability are a part of the scene. Then comes the butyl rubber surround. This material is known for providing the upper hand in three different ways. Chemical inertness, air impermeability, and weatherproof capacity!

As for the voice coils, they have a low-density, corrosion-resistant aluminum composition. These components possess the strength to perform under tension in both high-compression and high-stress environments.

So as far as design is concerned, you’re in the safe zone with this BOSS Audio creation.

The system I’m reviewing at the moment has the ability to peak at a good level. It can travel low enough for those who don’t wish to rattle the entire cab in the truck. And you have nothing but the advanced structure of the product to hold accountable for such performance.

Two things that tend to interfere with the overall experience is slight distortion and burnt smell. But, to be fair, these drawbacks are only negligible. So don’t allow them to discourage you from buying the BOSS Audio D10F 10-inch Shallow Mount Car Subwoofer.

Pros

  • The BOSS Audio subwoofer produces strong, clear bass.
  • ​Durability is quite impressive, given the super-cheap price.
  • Power handling is also a big surprise.

Cons

  • Distortion is a regular visitor.
  • So is the unpleasant burnt smell.

10. PYLE PLWCH10D 10-INCH ULTRA SLIM DVC SUBWOOFER – FOR EASY INSTALLATION

The biggest advantage of using the best shallow mount 10-inch subwoofer comes in the form of easy installation. So that’s exactly what you get with the PYLE PLWCH10D 10-Inch Ultra Slim DVC Subwoofer.

As the product name suggests, it’s ultra slim. Meaning you can fit the system into tight spots as well. And that’s primarily because of its minimal 3-inch mounting depth.

Moreover, this best shallow mount 10-inch subwoofer features double voice coils. These are supplied with a top quality mica-infused poly cone. Along with solid foam surround! So if I had to explain what that means, here it is.

The design of both the cone and surround works toward delivering a distortion-free, clean low-end. In fact, the voice coils add that extra punch. As a result of which you get access to an optimal level of frequency response as well.

And lastly, the terminals of the PYLE PLWCH10D don’t fail at securing a strong connection for wiring. So right from installation to distortion-free sound, the unit takes care of it all.

If you’re looking for the best shallow subwoofer for truck, this is the option for you. It is suitable for a car as well. The compact, lightweight design fits just about anywhere. And the kind of bass and overall sound quality the unit produces is something that you’ll come to appreciate in no time.

As I mentioned earlier, the terminals do a swell of a job at securing a stable connection. But with regards to quality, they are not so high.

Pros

  • The PYLE subwoofer is a thin, compact model.
  • ​Bass quality is top-notch.
  • Sound output is accurate and well-balanced.

Cons

  • No instructions provided by the manufacturer.
  • Terminals are a bit troublesome.

SHALLOW MOUNT 10-INCH SUBWOOFER – BUYER’S GUIDE

best-shallow-mount-10-inch-subwoofer-9

The first thing that comes to mind is the kind and quality of bass you’re looking for. On some occasions, even the best shallow mount subwoofer is not the greatest with regards to bass. And this has a lot to do with the size of the unit.

Different sizes produce different sounds for different types of music. So finding the correct match largely depends on your personal preferences.

With that in mind, allow me to bring to your notice that 10-inch shallow mount subwoofers are quite common. These units are considered to be safe, well-rounded options. Suitable for music that’s fast-paced and heavy on bass! Such as the club and rap genres!

In fact, such models are simply the perfect choice for those who demand big bass. Nevertheless, it’s time to address an important concern about the different sizes of shallow mount subwoofers.

DOES THE SIZE OF THE SUBWOOFER MATTER?

As far as car subwoofers go, you have to pay heed to two specifications that are measured using inches. These include mounting depth and diameter. The former has minimal influence when it comes to the subwoofer’s capacity to produce sound. Thanks to the innovation and advancement of technology. And it applies even more in the case of the best shallow mount 10-inch subwoofer. As for the latter, it is directly associated with bass sound depth.

So what does that tell you? It means that smaller diameter results in increasing the responsiveness of the driver. And that, in turn, delivers a more articulate and punchier bass. But the greatest news here is that the 10-inch models are considered to be common and highly versatile in that regard.

These kinds of shallow mount subwoofers have the ability produce well-rounded quality bass. However, when you desire bass production to be more genre-specific, please feel free to experiment with 8-inch or 12-inch options.

Anything below 8 inches does an excellent job of keeping up with faster heavy metal or electronic basslines. It makes way for greater articulation. Even if it does so by sacrificing some power and volume!

As for the 12-inch and higher units, they don’t fail at providing the heaviest low-end. The kind that works well with genres like club, pop, and hip-hop!

ADVANTAGES AND DISADVANTAGES OF USING SHALLOW MOUNT SUBWOOFERS

best-shallow-mount-10-inch-subwoofer-10

  • The Advantages:

The debate between shallow mount subwoofer vs regular subwoofer is quite a popular one. But it’s also the one in which the former always emerges as the ultimate winner. That’s because the shallow mount version brings tons of portability and lightness to the table. Unlike their regular counterparts!

That means installing the best shallow mount 10-inch subwoofer is just as easy as removing and transporting it. And that does sound like a pleasant, effortless experience.

  • The Disadvantages:

The quality of the sound and bass are major concerns in this case. The most unfortunate thing about shallow subs is that they are a bit lacking in bass. Along with frequency reproduction, especially the low-end kind! And this can cause quite a bit of inconvenience to the listener.

Another noteworthy problem is the subwoofer’s susceptibility to serious damages. Since the equipment tends to get dislodged easily, it has a greater chance of falling apart sooner than you can imagine.

The only way to avoid something like that from taking place is the reason why I wrote this article. To provide you with the best shallow mount 10-inch subwoofer. So such tragedies don’t come in the way of your flawless music experience.

WHERE TO PLACE THE SHALLOW MOUNT SUBWOOFER?

Traditionally, a subwoofer goes inside the trunk. It’s because the largeness of the gear allows it fit only in big, open spaces. But in the case of shallow mount subwoofers, you get access to more options.

This includes the trunk, which is still considered to be an excellent spot. It also means that, instead of hearing the bass, you’ll be feeling it more. Hence, achieving the optimal sound quality and volume from outside your vehicle!

But if bass sound quality matters the most, you might want to mount the equipment behind that deck of the rear speaker or behind those rear seats. Such positioning helps in producing more realistic music with an enveloping feel. In fact, it even creates a resonant and strong low-end treble.

A placement like this, when paired with decent door speakers, offers the perfect balance between low and high frequencies. And there’s nothing better than that, am I right?

However, if these options are not fitting, here’s another solution. Install the best shallow mount 10-inch subwoofer under your front seats.

So don’t be surprised if you happen to spot a slim subwoofer under seat. But at such times, the interior construction and framework of your car play a major role. As it can cause the subwoofer to produce a slightly muddled or muffled low-end.

My best advice to you would be to try out different placements. That way, you’ll be able to find the perfect sound before wrapping up the installation part.

FINAL NOTE

MY CHOICE: PIONEER TS-SW2502S4

Achieving high-quality bass response is not difficult when using the best shallow mount 10-inch subwoofer. All the units reviewed here grant nothing but throbbing tones for all kinds of genres. But if I were to pick an ultimate option, it would be the PIONEER TS-SW2502S4 10-Inch Shallow-Mount Subwoofer.

It uses a remarkable single voice coil to deliver deep bass. And thanks to the molded mica-infused resin cone design, the sound quality is also quite impressive.The cone structure is larger than normal so it can move more air.Having said which, accurate bass is not lost in the process.

Related Buyer’s guides and BestvsReviews Lists:

Double Din Head Unit Buyer’s Guide
Best Component Speakers to Buy

1 thought on “Best Shallow Mount 10-Inch Subwoofer (2018) – Buyer’s Guide

Leave a Comment